Automatic Soap Dispenser 610D

Specification:

• 1.Power Supply: DC9V / AA*6 Batteries
• 2.Liquid Volume: 650ml
• 3. Soap volume per time: 0.8~6.5ml adjustable (factory set at minimum 1.2±0.3 ml)
• 4.Environment temperature: 0-45ºC
• 5.Sensing distance: 5~15cm adjustable
• 6. Suitable soap viscosity: 1~3500mPa•s (cP)
• Recommend soap viscosity:1800 mPa•s (cP)

Features:

• 1.Control: Designed with SCM control, low power consumption.
• 2.Appearance: With s.s304 material , strong and beautiful.
• 3.Protecting device: The lock design on the top of cover will prevent irrespective opening. The electronic parts are sealed,waterproof and moistureproof.
• 4. Suitable liquid: liquid soap, body lotion, shampoo, abluent ...
• 5. Installation: Wall mounted, easily to be installed at hospital, facility, school, kitchen, bathroom, toilet, restaurant, hotel

How to adjust soap volume and distance?

Indicator flickers 5 times when be switched on (or you can press the button for 15s), then you get into the setting state:

Adjust soap volume:

Press the button 2 times. Put your hand under the soap spout when indicator flickers. The machine will give soap slowly. Move away your hand when you think the soap volume is enough.The sensor then adjust the soap volume for each dispensing itself.

Adjust sensing distance:

Press the button 5s. Put your hand under the sensor when indicator flickers. The machine then set the induce distance to the position where your hand is. Please note the distance shall be not less than 5cm.

Overall dimensions:

Installation diagram: